 |
Strap clips and
magnetic badge
holders provide an
economical and
convenient method
of wearing your
badge prominently. |
| |
| Strap Clips |
|
| |
 |
| |
| 2-Hole Strap Clip |
| |
| • |
Nickel-plated steel with 2 3/4”
(70mm) clear vinyl strap |
|
|
| |
 |
| |
| 2-Hole Strap Clip |
| |
| • |
Stainless steel with
3 1/2”
(89mm) clear vinyl strap |
|
|
| |
 |
| |
| 2-Hole Strap Clip |
| |
| • |
Nickel-plated steel with 2 3/4”
(70mm) opaque white,
filament-reinforced vinyl strap |
|
|
| |
 |
| |
| 2-Hole Strap Clip |
| |
| • |
Nickel-plated steel with 2 3/4”
(70mm) clear vinyl strap |
|
|
| |
| |
|
| Magnetic Card Holders |
| |
| |
MagnaBadge Magnetic
Badge Attachment |
| |
| • |
One steel plate with 2 round
“rare-earth” magnets and one
zinc-plated steel plate with
pressure-sensitive foam
tape Mounting Plate. |
| • |
Dimensions: 1 3/4 x 1/2”
(44.5 x 12.5mm) |
|
|
 |
 |
| |
| |
MagnaMini Magnetic
Badge Attachment |
| |
| • |
One ABS encased plate with
2 round “rare-earth” magnets
and one zinc-plated steel plate
with pressure-sensitive foam
tape Mounting Plate. |
| • |
Dimensions: 1 1/4 x 3/8”
(32 x 9.5mm) |
|
|
 |
 |
|
| Grip and Clamp Attachments |
| |
|
 |
| |
The Gripper – No Need
for Slot Punching! |
| |
| • |
The Gripper can be added to
existing attachments such as
badge reels, lanyards and
strap clips. It holds 30mil
standard, smart chip or
proximity cards without the
need to slot punch the card.
Plastic outer piece with
silicone inner core. It holds
cards with up to 5 lbs of
vertical force and greater
than 5 lbs of horizontal
force. |
| • |
Dimensions: 11/16” (17mm)
wide x 1” (25mm) high. |
|
 |
|
 |
| |
| The Card Clamp – Great for Today’s
high Tech Cards |
| |
| • |
Replaces standard strap end fittings. No
need to slot punch, which can ruin embedded
electronics in proximity, smart cards and other
high technology cards. Grips to a pull strength
of 10 lbs. For 0.30” thick ID cards, as well as
thinner cards too! |
|
|
|
| 3-in-One Slot Punch |
| |
|
 |
| |
| • |
This 3-in-1 punch switches from slot punch
(9/16 x 1/8”) to one-hole punch (1/4” round)
to round corner punch. The centre guide
adjusts for accurate hole centering. |
| • |
Punch your plastic or laminated ID cards, or
up to 18 sheets of 20 lb. bond paper. Plus
the handle locks down for easy storage. |
|
|
